A

Abu Bakar, Muhammad Syamir (2023) Multi objective parameters optimisation of kenaf cementitious composites material for 3d printing applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Ramli, Shazleen (2023) The optimization technique of hcl etch TiO2 ROD thin film for photocatalytic degradation of methylene blue. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Basri, Kasbi (2023) Dynamic properties of Malaysian peat soil based on field geophysical methods. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

F

Fadzil, Farizah (2023) Study of semi continuous stirred batch pilot-scale mono-digestion of food waste. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fauzi, Muhamad Razizy (2023) Interfacial reaction and corrosion behaviour between SAC305 and SAC307 solder on electroless nickel/immersion silver (ENImAg) and electroless nickel/immersion gold (ENIG) surface finish. Masters thesis, Universiti Tun Hussein Onn Malaysia.

G

Ghazali, Nurul Bashirah (2022) Cable fault detection for DSL communication using machine learning. Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

Jaafar, Marliana (2023) Capability oF AgSiN and SU-8 film in protecting silver-based surface plasmons resonance (SPR) technique for honey water content detection. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

K

Khairuddin, Siti Amirah Azra (2023) Performance of concrete filled hollow section with fibrous foamed concrete subjected to axial compression load. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M

Mahadi, Ismail Ahmat (2023) Investigating the effects of temperature and humidity for LCL compensation wireless power transfer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahmod, Luqman Hakim (2022) Onsite measurement techniques and modelling to minimize magnetic field strength under overhead transmission lines. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

N

Nasidi, Ida Norfaslia (2022) The influence of alkaline treatment on the acoustical performance of EFB, MF, CF AND KF natural fiber. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

R

Ruhaizat, Nasha Emieza (2023) The analysis of life cycle assessment and life cycle costing in direct recycling hot press forging of aluminium AA7075. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

S

Sim, Xian Wen (2023) Stochastic approximation approaches for discrete-time nonlinear stochastic optimal control problem in engineering applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yahaya, Izat (2022) Penentuan keberkesanan penjerap komposit bagi kajian larut resapan. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Z

Zainuddin, Najahulfazliah (2023) Mixed convection heat transfer in a lid-driven square and rectangular cavity filled with a porous medium. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.