A

Abdul Manaf, Izzati (2023) The influence of glass ceramic waste (GCW) on the physical, mechanical and thermal properties of foamed concrete (FC). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Almusawi, Mohammed Baqer Hasan (2023) Management of construction and demolition waste in Kuwait. Masters thesis, Universiti Tun Hussein Onn Malaysia.

E

Elsonoki, Mustafa Milad (2022) Towards enhancing value engineering practice in the Libyan Construction Industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

I

Irfanullah, Irfanullah (2023) Factors causing delays and their mitigation measures in building construction projects of Pakistan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K

Ku Meh, Ku Muhammad Firdaus (2023) Response surface methodology for prediction and optimisation of concrete properties containing coal bottom ash. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

Maulana, Malik Ridwan (2022) Experimental study and fea modelling of using woven fabric kenaf composite sheets to improve flexural resistance on foamed concrete beams. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Al-Khatib, Fadi Hassan (2023) An improved approach of optimization using computational methods for designing sustainable irregular tall buildings to wind motions. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

O

Omar, Mohamad Al-Zaim (2023) Flexural strength of plain concrete beam strengthened with woven kenaf FRP plate: experimental works and numerical modelling. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Osman, Mohamad Hairi (2023) Mechanical properties of expanded polystyrene beads - palm oil fuel ash concrete and its reinforced concrete beam performance. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

R

Ramli, Fazilah (2022) Supply prediction model for high-cost multi-storey houses. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Robin, Rolyselra Orbintang (2023) Building information modelling (BIM) performance evaluation model in the Malaysian Construction Industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rosli, Mohammad Shahir (2023) Multiple response Taguchi optimisation for injected moulded polypropylene nanoclay processing and fibre content, for building appliances. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

S

Senusi, Farasyafinaz (2023) Life Cycle Assessment (LCA) of 3D Bone Tissue Engineering (BTE) scaffolds by using GaBi software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniam, Shivaraj (2022) An investigation on the construction waste generation rate in Malaysia based on different types of projects. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Waliyo, Rabiatul Adawiyah (2023) Acoustic performance of RHA-seawater concrete with coal bottom ash as sand replacement in low frequency by sound absorption and transmission. Masters thesis, Universiti Tun Hussein Onn Malaysia.